---
title: "General Ledger: Meaning, Example, Accounts, and Template"
description: "General ledger meaning with a worked example: 8 journal entries posted to ledger accounts and a balanced trial balance, plus account types and a template."
url: https://emptyspaces.ai/resources/blog/general-ledger
language: en
---

[Blog](https://emptyspaces.ai/resources/blog) Guide

# General ledger: Meaning, example, and how it works

Published November 19, 2026 19 min read

Key takeaways

- A general ledger is the complete record of a company's accounts, with every posted transaction and a running balance for each account, and it's the source of the trial balance and the financial statements.
- In the worked example, eight journal entries post to eight ledger accounts, and the trial balance totals $81,500 on each side, with $11,500 of net income for March 2026.
- Subledgers hold the detail for receivables, payables, and fixed assets, while the general ledger holds one control account for each, so every subledger total should match its control account at month-end.

A general ledger (GL) is the master record of every account a company keeps, holding each posted journal entry and a running balance for each account. Those accounts are assets, liabilities, equity, revenue, and expenses. Keeping it accurate gives you financial statements you can trust, catches posting errors before they reach a report, and keeps your audit trail complete. This guide follows one small company's month from journal entries to a trial balance. It then covers account types, subledgers, account numbering, a GL template, and month-end controls.

## General ledger example: One month from journal entries to trial balance

This general ledger example posts eight journal entries into eight accounts and ends with a trial balance of $81,500 on each side. **Example:** A small design agency opens on March 1, 2026. All amounts in this general ledger sample are illustrative, and the account numbers follow a common four-digit scheme.

### Step 1: Record the journal entries

Every transaction is first recorded as a journal entry with equal debits and credits, in date order.

| Ref | Date | Description | Debit account | Credit account | Amount |
| ----- | --------- | ---------------------------------------------- | ------------------------ | ------------------------ | ------- |
| JE-01 | 3/1/2026 | Owners invest cash for common stock | 1010 Cash | 3000 Common stock | $50,000 |
| JE-02 | 3/3/2026 | Buy design workstations on account | 1500 Equipment | 2000 Accounts payable | $12,000 |
| JE-03 | 3/5/2026 | Pay March office rent | 6000 Rent expense | 1010 Cash | $4,000 |
| JE-04 | 3/12/2026 | Invoice client for a brand project | 1200 Accounts receivable | 4000 Service revenue | $18,000 |
| JE-05 | 3/15/2026 | Client pays on completion of a website project | 1010 Cash | 4000 Service revenue | $6,500 |
| JE-06 | 3/20/2026 | Collect part of the brand project invoice | 1010 Cash | 1200 Accounts receivable | $10,000 |
| JE-07 | 3/25/2026 | Pay part of the equipment bill | 2000 Accounts payable | 1010 Cash | $5,000 |
| JE-08 | 3/31/2026 | Pay March salaries | 6100 Salaries expense | 1010 Cash | $9,000 |

The eight entries total $114,500 of debits and $114,500 of credits. Each one has a reference number, so you can trace any ledger line back to it. JE-08 keeps payroll simple as one cash payment. A real payroll entry also splits out tax withholdings and the employer's taxes, as shown later in this guide.

### Step 2: Post each entry to its ledger account

Posting copies each debit and credit to the account it names, with the date and reference, and updates that account's running balance. "Dr" marks a debit balance and "Cr" a credit balance.

**1010 Cash**

| Date | Ref | Description | Debit | Credit | Balance |
| --------- | ----- | --------------------------- | ---------- | ---------- | ------------- |
| 3/1/2026 | JE-01 | Owner investment | 50,000 | | 50,000 Dr |
| 3/5/2026 | JE-03 | March rent | | 4,000 | 46,000 Dr |
| 3/15/2026 | JE-05 | Website project payment | 6,500 | | 52,500 Dr |
| 3/20/2026 | JE-06 | Brand project collection | 10,000 | | 62,500 Dr |
| 3/25/2026 | JE-07 | Payment to equipment vendor | | 5,000 | 57,500 Dr |
| 3/31/2026 | JE-08 | March salaries | | 9,000 | 48,500 Dr |
| **Total** | | | **66,500** | **18,000** | **48,500 Dr** |

**1200 Accounts receivable**

| Date | Ref | Description | Debit | Credit | Balance |
| --------- | ----- | ------------------------ | ------ | ------ | --------- |
| 3/12/2026 | JE-04 | Brand project invoice | 18,000 | | 18,000 Dr |
| 3/20/2026 | JE-06 | Brand project collection | | 10,000 | 8,000 Dr |

**2000 Accounts payable**

| Date | Ref | Description | Debit | Credit | Balance |
| --------- | ----- | ------------------------------ | ----- | ------ | --------- |
| 3/3/2026 | JE-02 | Workstations bought on account | | 12,000 | 12,000 Cr |
| 3/25/2026 | JE-07 | Payment to equipment vendor | 5,000 | | 7,000 Cr |

**4000 Service revenue**

| Date | Ref | Description | Debit | Credit | Balance |
| --------- | ----- | ----------------------- | ----- | ------ | --------- |
| 3/12/2026 | JE-04 | Brand project invoice | | 18,000 | 18,000 Cr |
| 3/15/2026 | JE-05 | Website project payment | | 6,500 | 24,500 Cr |

**Accounts with one posting**

| Account | Date | Ref | Debit | Credit | Balance |
| --------------------- | --------- | ----- | ------ | ------ | --------- |
| 1500 Equipment | 3/3/2026 | JE-02 | 12,000 | | 12,000 Dr |
| 3000 Common stock | 3/1/2026 | JE-01 | | 50,000 | 50,000 Cr |
| 6000 Rent expense | 3/5/2026 | JE-03 | 4,000 | | 4,000 Dr |
| 6100 Salaries expense | 3/31/2026 | JE-08 | 9,000 | | 9,000 Dr |

Eight entries with two lines each make 16 postings. Cash has six, receivables, payables, and revenue have two each, and the other four accounts have one each.

### Step 3: Pull the balances into a trial balance

The trial balance lists each account's ending balance in a debit or credit column, and the two columns must be equal.

**Unadjusted trial balance, March 31, 2026**

| Account | Debit | Credit |
| ------------------------ | ---------- | ---------- |
| 1010 Cash | 48,500 | |
| 1200 Accounts receivable | 8,000 | |
| 1500 Equipment | 12,000 | |
| 2000 Accounts payable | | 7,000 |
| 3000 Common stock | | 50,000 |
| 4000 Service revenue | | 24,500 |
| 6000 Rent expense | 4,000 | |
| 6100 Salaries expense | 9,000 | |
| **Total** | **81,500** | **81,500** |

What the balances tell you:

- **Net income:** $24,500 revenue − ($4,000 rent + $9,000 salaries) = $11,500
- **Balance sheet:** Assets of $48,500 + $8,000 + $12,000 = $68,500, which equals liabilities of $7,000 plus equity of $50,000 + $11,500 = $68,500
- **Cash:** $66,500 received − $18,000 paid = $48,500, which should agree to the bank statement after reconciliation
- **What comes next:** Month-end [adjusting entries](https://emptyspaces.ai/resources/blog/adjusting-entries), such as depreciation on the workstations, then the adjusted trial balance and the statements

If the two totals differ, the cause is usually a one-sided posting, a transposed amount, or a balance placed in the wrong column. Recheck the postings for the account that's off before you go further.

## What is a general ledger in accounting?

A general ledger is the full set of a company's accounts, each holding the dated debits and credits posted to it and a running balance. It's also called the book of final entry, and in the UK, the nominal ledger. These terms come up throughout this guide:

- **Ledger account:** One account in the general ledger, such as 1010 Cash, with its own page or record of postings
- **Posting:** Copying a journal entry's debit and credit lines to the ledger accounts they name
- **Control account:** A general ledger account, such as accounts receivable, whose balance is supported by a detailed subledger

The general ledger definition is the same in a paper book, a spreadsheet, or accounting software. Only the way entries get posted changes.

### What is ledger accounting?

Ledger accounting is the practice of sorting every transaction by account, so each account shows its full history and current balance. It's the step that turns a date-ordered list of journal entries into balances you can report.

## What is the primary function of a general ledger?

A general ledger's primary function is to hold every account's balance in one place, so you can prove debits equal credits and build the financial statements. It does four jobs in general ledger accounting:

- **Classify:** Group every transaction by account, so you see all cash or all revenue at once
- **Balance:** Keep a running balance for each account, which feeds the trial balance
- **Report:** Supply the balances behind the income statement, balance sheet, and cash flow statement
- **Trace:** Link each balance back to its journal entries and source documents for review and audit

## What are the five types of general ledger accounts?

The five types of general ledger accounts are assets, liabilities, equity, revenue, and expenses. Knowing each type's normal balance tells you whether a debit raises or lowers it.

| Account type | Normal balance | Increased by | Examples | Statement |
| ------------ | -------------- | ------------ | --------------------------------------------------------------------- | ---------------- |
| Assets | Debit | Debit | 1010 Cash, 1200 Accounts receivable, 1500 Equipment, prepaid expenses | Balance sheet |
| Liabilities | Credit | Credit | 2000 Accounts payable, accrued expenses, deferred revenue, loans | Balance sheet |
| Equity | Credit | Credit | 3000 Common stock, retained earnings, owner's capital | Balance sheet |
| Revenue | Credit | Credit | 4000 Service revenue, product sales, interest income | Income statement |
| Expenses | Debit | Debit | 6000 Rent expense, 6100 Salaries expense, software, depreciation | Income statement |

Some charts list gains and losses as separate groups. Contra accounts, such as accumulated depreciation, carry the opposite balance of the group they sit in.

## How does the general ledger fit into the accounting cycle?

The general ledger sits between the journal and the trial balance. Entries are journalized, posted to the ledger, summarized in a trial balance, and reported in the statements. Seeing the flow helps you find where an error entered.

| Step | Where it happens | What you do | What it produces |
| ------------------------ | ------------------------------------------------- | ---------------------------------------------------------- | -------------------------------------------------------- |
| 1. Journal | General journal or a module such as AP or billing | Record each transaction's debits and credits in date order | Journal entries with references |
| 2. General ledger | Ledger accounts | Post each line to its account and update the balance | Account balances |
| 3. Trial balance | Report run from the ledger | List every balance and confirm debits equal credits | Unadjusted trial balance |
| 4. Adjustments | Journal, then ledger | Post accruals, deferrals, depreciation, and corrections | Adjusted trial balance |
| 5. Financial statements | Reports from the adjusted trial balance | Group balances into statement lines | Income statement, balance sheet, and cash flow statement |

## How do you prepare a general ledger?

To prepare a general ledger, set up your accounts and opening balances, then post each approved journal entry to its account and update that account's balance. The same steps apply on paper, in Excel, or in software.

1. **Set up the accounts:** Create one ledger account for each line in your chart of accounts, with its number, name, and type
2. **Enter opening balances:** A new business starts every account at zero, as in the example. Existing books bring in last period's closing balances, which must balance
3. **Check the entry:** Confirm debits equal credits, the support is attached, and the entry is approved
4. **Find each account:** Look up the account by its number, such as 1200 for accounts receivable
5. **Record the line:** Enter the date, journal reference, description, and the debit or credit amount
6. **Update the balance:** For asset and expense accounts, add debits and subtract credits. For liability, equity, and revenue accounts, add credits and subtract debits.
7. **Mark it posted:** Note the posting on the journal entry, so it can't be posted twice
8. **Check the total:** Confirm total debits posted equal total credits posted, $114,500 each in the example

In accounting software, posting happens when an approved entry is saved as posted. Your team's work moves to reviewing entries before they post and locking the period after close.

## General ledger vs general journal: What's the difference?

The general journal records each transaction in date order, while the general ledger sorts the same lines by account to show each balance. The journal answers "what happened," and the ledger answers "what's the balance."

| | General journal | General ledger |
| ------------------ | ----------------------------------------------------- | ----------------------------------------------------- |
| Order | By date | By account |
| One record shows | Every account in one transaction | Every transaction in one account |
| Also called | Book of original entry | Book of final entry |
| Place in the cycle | First | Second, after posting |
| In the example | JE-06: debit cash $10,000, credit receivables $10,000 | Cash rises to $62,500, and receivables fall to $8,000 |
| Used for | Reviewing and approving entries | Balances, the trial balance, and the statements |

A journal entry is one transaction's record, and the general ledger holds the result of every entry. The general ledger vs journal entry question comes down to detail versus totals. For the entries you post at month-end and how to review them, see [month-end journal entries](https://emptyspaces.ai/resources/blog/month-end-journal-entries).

## General ledger vs subledger: What's the difference?

A subledger holds the detail for one area, such as each customer invoice, while the general ledger holds one control account with the total. Splitting the detail out keeps the general ledger short enough to review.

| | General ledger | Subledger |
| --------------- | ---------------------------------------------------------- | ---------------------------------------------- |
| Scope | Every account in the business | One area, such as receivables or payables |
| Detail | Posted transactions and a running balance for each account | One line per customer, vendor, or asset |
| Who works in it | Controllers and the reporting team | AR, AP, and fixed asset teams |
| How it connects | Holds the control account | Posts summary totals to the control account |
| What it feeds | Trial balance and financial statements | The control account, plus agings and registers |

The three subledgers behind the example's control accounts:

| Subledger | What it tracks | GL control account | Check against the example |
| ------------------- | ----------------------------------------------------------------- | ------------------------------------------- | ------------------------------------------------------------------------------------------------ |
| Accounts receivable | Open invoices by customer | 1200 Accounts receivable | The AR aging shows one client owing $8,000 ($18,000 billed − $10,000 collected), equal to the GL |
| Accounts payable | Unpaid bills by vendor | 2000 Accounts payable | Open bills show one vendor owed $7,000 ($12,000 billed − $5,000 paid), equal to the GL |
| Fixed assets | Each asset's cost, in-service date, useful life, and depreciation | 1500 Equipment and accumulated depreciation | The asset register shows $12,000 of workstations, equal to the GL |

When a subledger total and its control account disagree, look for a manual entry posted straight to the control account. Also check for an item posted in one system but not the other. Matching the two every month is the job of a [general ledger reconciliation](https://emptyspaces.ai/resources/blog/general-ledger-reconciliation), and for receivables and payables, an [AP and AR reconciliation](https://emptyspaces.ai/resources/blog/ap-ar-reconciliation).

Accounts without a full subledger, such as prepaid expenses and accruals, are supported by a schedule instead. A prepaid expenses ledger lists each prepayment, its term, and the amount that moves to expense each month, and its total should equal the prepaid balance in the general ledger. See [prepaid expenses](https://emptyspaces.ai/resources/blog/prepaid-expenses) for the schedule and its entries.

### How does payroll post to the general ledger?

Payroll usually posts to the general ledger as one summary journal entry per pay run, while the payroll system keeps the detail for each employee. The entry splits gross pay into net pay, withholdings, and the employer's own taxes.

**Example:** If the agency's $9,000 of March salaries (JE-08) ran through a full payroll, the entry would look like this. Employee Social Security and Medicare tax is 6.2% plus 1.45%, or 7.65%, and the employer pays a matching 7.65% (IRS Tax Topic 751, updated November 9, 2026). Federal income tax withheld is an illustrative $1,000. This entry isn't part of the trial balance above.

| Account | Debit | Credit |
| -------------------------- | ------------ | ------------ |
| 6100 Salaries expense | 9,000.00 | |
| 6110 Payroll tax expense | 688.50 | |
| 1010 Cash (net pay) | | 7,311.50 |
| 2100 Payroll taxes payable | | 2,377.00 |
| **Total** | **9,688.50** | **9,688.50** |

- **Employee and employer tax:** 7.65% × $9,000 = $688.50 each
- **Net pay:** $9,000 − $688.50 − $1,000 = $7,311.50
- **Payroll taxes payable:** $1,000 + $688.50 + $688.50 = $2,377, which clears when you deposit the taxes

The example leaves out state taxes, unemployment taxes, and benefits, which add more payable lines. If payroll runs through a clearing account, that account should be back at zero once the pay run and the tax deposit both post.

## General ledger vs trial balance: What's the difference?

The general ledger holds every transaction for each account, while a trial balance is a one-page report of each account's ending balance on one date. The trial balance proves debits equal credits, and the ledger shows why each balance is what it is.

| | General ledger | Trial balance |
| -------------- | -------------------------------------------------------- | ------------------------------------------------ |
| Detail | Every posting, with date, reference, and running balance | One ending balance per account |
| Purpose | Record and classify transactions | Prove debits equal credits before the statements |
| Format | One page or report section per account | Two columns, debits and credits, with totals |
| When | Updated with every posting | Run at period-end, often three times |
| In the example | 16 postings across eight accounts | Eight lines totaling $81,500 on each side |

A trial balance can be run three times in a cycle: unadjusted, adjusted, and after year-end [closing entries](https://emptyspaces.ai/resources/blog/closing-entries), the [post-closing trial balance](https://emptyspaces.ai/resources/blog/post-closing-trial-balance). A trial balance that balances doesn't prove the ledger is right. An entry posted to the wrong account, or never posted at all, still leaves debits equal to credits.

## General ledger vs chart of accounts: What's the difference?

The chart of accounts lists account numbers, names, and types with no amounts, while the general ledger holds the transactions and balances for those accounts. The chart sets the structure, and the ledger fills it.

| | Chart of accounts | General ledger |
| ------------ | -------------------------------------- | ----------------------------------------------------- |
| Holds | Account number, name, type, and status | Dated postings and balances |
| Changes when | You add, rename, or retire an account | Any entry posts |
| Example | 1200 Accounts receivable, asset | 1200 Accounts receivable, $8,000 Dr on March 31, 2026 |

When you need a new account, add it to the chart first and then post to it, so every ledger account has an approved number, name, and type.

## What are general ledger codes?

General ledger codes are the account numbers that identify each account in the general ledger, such as 6100 for salaries expense. In a numbering scheme like the one below, the first digit tells you the account type, and a general ledger codes list is the chart of accounts sorted by number.

| Range | Account type | Example |
| ------------ | ------------------------ | --------------------- |
| 1000 to 1999 | Assets | 1010 Cash |
| 2000 to 2999 | Liabilities | 2000 Accounts payable |
| 3000 to 3999 | Equity | 3000 Common stock |
| 4000 to 4999 | Revenue | 4000 Service revenue |
| 5000 to 5999 | Cost of goods sold | 5000 Direct labor |
| 6000 to 7999 | Operating expenses | 6100 Salaries expense |
| 8000 to 8999 | Other income and expense | 8100 Interest expense |

Companies with several departments or locations often add segments to the code for department, location, or entity, such as 6100-20-NY for salaries in department 20 in New York. Many ERPs keep these out of the account number with separate fields instead. NetSuite calls department, class, and location classifications and lets you add custom segments, and Sage Intacct calls them dimensions. Either way, the main account list stays short.

General ledger mapping links each account to the line where it appears on a report or in another system. You use it to build financial statement lines, to combine subsidiaries with different charts in a consolidation, and to move balances to a new system.

| GL account | Maps to statement line | Maps to new system's account |
| --------------------- | --------------------------- | ---------------------------- |
| 6000 Rent expense | Occupancy | 61000 Rent and occupancy |
| 6100 Salaries expense | Payroll | 60000 Salaries and wages |
| 1500 Equipment | Property and equipment, net | 15000 Computer equipment |

## General ledger template and format

A general ledger template has a company and period header, then one section per account with date, reference, description, debit, credit, and balance columns. Using one fixed layout makes every account easy to review and roll forward.

**Header:** Company name, "General ledger," and the period, such as March 1 to 31, 2026.

**Columns for each account section:**

| Column | What goes in it | Example (1200 Accounts receivable) |
| ----------- | --------------------------------------- | ---------------------------------- |
| Date | Posting date | 3/20/2026 |
| Ref | Journal entry or source document number | JE-06 |
| Description | What the transaction was | Brand project collection |
| Debit | Amount added to a debit-normal account | Blank |
| Credit | Amount added to a credit-normal account | 10,000 |
| Balance | Running balance after this line | 8,000 Dr |

**Sample account section:**

| Date | Ref | Description | Debit | Credit | Balance |
| --------- | ----- | ------------------------ | ------ | ------ | --------- |
| 3/1/2026 | | Opening balance | | | 0 |
| 3/12/2026 | JE-04 | Brand project invoice | 18,000 | | 18,000 Dr |
| 3/20/2026 | JE-06 | Brand project collection | | 10,000 | 8,000 Dr |
| 3/31/2026 | | Closing balance | 18,000 | 10,000 | 8,000 Dr |

To build a general ledger template in Excel or Google Sheets:

1. **Give each account its own tab:** Put date, ref, description, debit, and credit in columns A to E, one row per posting, with the opening balance in F2
2. **Add a running balance:** In F3, use =F2+D3-E3 for asset and expense accounts, or =F2-D3+E3 for liability, equity, and revenue accounts, and copy it down
3. **Add a summary tab:** List each account's closing balance in a debit or credit column. That tab is your trial balance, and its two totals must match.
4. **Add a check cell:** Total debits posted minus total credits posted across all tabs should equal zero
5. **Carry balances forward:** Each month's opening balance is last month's closing balance. Revenue and expense accounts keep building year to date until year-end closing entries move them to retained earnings and reset them to zero

### What is a general ledger report?

A general ledger report is the system's printout of the ledger for a date range, with each account's opening balance, postings, and closing balance. A general ledger detail report lists each transaction, and a summary report shows only totals by account.

## How do you keep the general ledger clean at month-end?

Keep the general ledger clean by controlling what posts and when, and by proving each balance sheet account to outside support before you lock. These five controls catch the errors a balanced trial balance can't.

1. **Enforce cutoff:** Post each transaction in the period it belongs to. Under the accrual method, that means recording expenses when incurred and revenue when (or as) you deliver what the customer paid for, as ASC 606-10-25-23 requires, whatever the payment date. Month-end [accrued expenses](https://emptyspaces.ai/resources/blog/accrued-expenses) and [accrued revenue](https://emptyspaces.ai/resources/blog/accrued-revenue) entries catch the items that haven't been billed yet.
2. **Require approvals:** Every manual journal entry needs a preparer, a different approver, and attached support. No one approves their own entry.
3. **Reconcile balance sheet accounts:** Tie cash to the bank statement with a [bank reconciliation](https://emptyspaces.ai/resources/blog/bank-reconciliation), control accounts to their subledgers, and accruals and prepaids to schedules. Each [account reconciliation](https://emptyspaces.ai/resources/blog/account-reconciliation) should have a preparer, a reviewer, and support for every reconciling item.
4. **Clear suspense and clearing accounts:** Investigate and clear balances that should be zero at month-end, such as suspense and payroll clearing, and confirm intercompany balances agree between entities
5. **Review movements and lock:** Compare each account with the prior month, explain changes above your threshold, then [lock the period](https://emptyspaces.ai/resources/blog/lock-accounting-period) so nothing back-dates into it

These steps are the core of the [month-end close](https://emptyspaces.ai/resources/blog/month-end-close). Running them in the same order each month keeps your ledger consistent across preparers and audit-ready at year-end.

## How long should you keep general ledger records?

Keep general ledger records at least as long as the IRS can examine the returns they support, which is generally three years from filing. The IRS page "How long should I keep records?" (last reviewed June 30, 2026) sets these periods:

| Situation | Keep records for |
| ----------------------------------------------------------------------------- | ---------------------------------------------------------------------- |
| Most returns | 3 years |
| You file a claim for credit or refund after you file | 3 years from filing or 2 years from paying the tax, whichever is later |
| You claim a loss from worthless securities or a bad debt deduction | 7 years |
| You fail to report income of more than 25% of the gross income on your return | 6 years |
| Employment tax records | At least 4 years after the tax is due or paid, whichever is later |
| You don't file a return, or file a fraudulent one | Indefinitely |

Your auditors, lenders, or state rules may require longer, so set the period in a written retention policy.

## What is the best general ledger software?

The best general ledger software is the one that fits your number of entities, your transaction volume, and the controls you need. Every option records journal entries and produces the trial balance and statements from the same data.

General ledger systems you'll often see include:

- QuickBooks Online
- Xero
- NetSuite
- Sage Intacct
- Microsoft Dynamics 365 Business Central
- SAP S/4HANA
- Oracle Fusion Cloud ERP
- Workday Financial Management

Whatever you choose, check for these capabilities:

- **Audit trail:** Every entry shows who created, approved, and changed it, and when
- **Period locks:** Closed months can't take new postings without a reopen
- **Approval workflow:** Manual entries route to an approver before they post
- **Dimensions:** Department, location, and entity tags without extra accounts
- **Integrations:** Bank feeds and connections to billing, payroll, and AP tools

### How do you find the general ledger in QuickBooks?

In QuickBooks Online, go to Reports, then Standard reports, and choose General Ledger from the report list. An Intuit help article updated August 3, 2026, shows how to add debit and credit columns and filter the report by account.

### What are the benefits of a cloud-based general ledger?

A cloud-based general ledger lets your team work in one shared ledger from anywhere, with updates applied by the vendor instead of your IT team. It also makes bank feeds, integrations, and user permissions easier to set up and maintain than a desktop file.

### Can general ledger software automate bank reconciliations?

Yes, if your general ledger software supports bank feeds: it imports bank transactions and suggests matches to ledger entries using rules you set. You still review the unmatched items, record what's missing, and sign off on the reconciliation before you close the month.

### Should you replace your general ledger or add AI on top of it?

Replace the general ledger when the ledger itself is the limit, such as too few entities, dimensions, or currencies for how you operate. If the ledger works but the close around it is slow, adding tools on top keeps your system of record in place.

- **Replacing it:** Map the chart of accounts, migrate opening balances and history, retrain the team, and usually run both systems in parallel for at least one close
- **Adding AI on top:** Connect to the existing ledger, decide what a tool may read and what it may post, and keep your approval rules and period locks in charge

## How we approach it

Our Close Agent works on top of your general ledger. It ties each balance sheet and control account to its bank, subledger, or schedule support. It prepares the workpaper and any proposed entries, then sends them to a named reviewer before the period locks. If you want that ledger review prepared before your team starts, [explore the Close Agent](https://emptyspaces.ai/product/close) or [book a working session](https://cal.com/mm-rebase/emptyspaces-30min).

Share this article

- [ Share on X ](https://x.com/intent/post?url=https%3A%2F%2Femptyspaces.ai%2Fresources%2Fblog%2Fgeneral-ledger&text=General%20ledger%3A%20Meaning%2C%20example%2C%20and%20how%20it%20works)
- [ Share on LinkedIn ](https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Femptyspaces.ai%2Fresources%2Fblog%2Fgeneral-ledger)

## See our agents work through a finance process that matters to your team.

Tell us where the work gets stuck. We’ll walk through how the agents could help.

[Book a working session](https://emptyspaces.ai/contact-us)
