Key takeaways
- The journal entry for depreciation debits depreciation expense and credits accumulated depreciation, so a $60,000 machine with a $6,000 salvage value and a 5-year life gets a $900 entry every month.
- When you sell or scrap an asset, you remove both its cost and its accumulated depreciation, and the gap between net book value and proceeds is your gain or loss: $3,000 either way in the sale examples below.
- A fixed asset reconciliation rolls cost and accumulated depreciation forward (opening + additions − disposals = closing) and ties the register to the general ledger every month.
Getting the depreciation entry right keeps your expense in the right month, keeps net book value accurate, and gives you a fixed asset balance you can defend in an audit. This guide follows one machine from purchase to sale, with every entry, four methods, partial months, disposals, a reusable fixed asset reconciliation, error fixes, the tax entry, and the IFRS differences.
What is the journal entry for depreciation?
The journal entry for depreciation is a debit to depreciation expense and a credit to accumulated depreciation, for the amount of the asset's cost allocated to that period. Seeing the entry with real numbers first makes every later entry on this page easier to follow.
- Depreciation expense: An income statement account that holds the period's depreciation and closes to retained earnings at year-end through your closing entries
- Accumulated depreciation: A contra asset account on the balance sheet that holds all depreciation recorded to date on the asset. UK and Indian textbooks call it provision for depreciation
- Net book value: Cost minus accumulated depreciation, also called carrying value
Example: Your company buys a packaging machine for $60,000 and places it in service on January 2, 2026. You expect a 5-year useful life and a $6,000 salvage value. Your policy takes a full month of depreciation for assets placed in service by the 15th.
- Depreciable base: $60,000 cost − $6,000 salvage = $54,000
- Annual straight-line depreciation: $54,000 ÷ 5 years = $10,800
- Monthly depreciation: $10,800 ÷ 12 = $900
Depreciation journal entry, January 31, 2026
| Account | Debit | Credit |
|---|---|---|
| Depreciation expense | $900 | |
| Accumulated depreciation, machinery and equipment | $900 | |
| Memo: January 2026 straight-line depreciation, packaging machine |
You post the same $900 entry every month for 60 months. The asset account stays at $60,000 the whole time, and accumulated depreciation grows until it reaches $54,000.
Whatever the method, depreciation expense is the debit and accumulated depreciation is the credit. No cash moves: you paid for the machine when you bought it, and depreciation spreads that cost over the months that use it. The entry has the same shape for machinery, furniture, buildings, vehicles, or computers, with an accumulated depreciation account for each asset class. Amortization of intangible assets, such as patents or capitalized software, uses the same structure with amortization expense and accumulated amortization.
How do you calculate depreciation?
You calculate depreciation by choosing a method, then applying its formula to the asset's cost, salvage value, and useful life or expected output. The method you pick changes how much expense lands in each year, but never the total.
Using the same $60,000 machine, with a $6,000 salvage value and a 5-year life:
| Method | Formula | Year 1 | Year 2 |
|---|---|---|---|
| Straight-line | (Cost − salvage) ÷ useful life | $10,800 | $10,800 |
| Double declining balance | Opening book value × (2 ÷ useful life) | $24,000 | $14,400 |
| Units of production | (Cost − salvage) ÷ total expected units × units this year | $12,960 | $11,880 |
| Sum-of-the-years' digits | (Cost − salvage) × remaining life ÷ sum of the years | $18,000 | $14,400 |
How each figure is built:
- Straight-line: $54,000 ÷ 5 = $10,800 a year, or $900 a month
- Double declining balance: The rate is 2 ÷ 5 = 40%. Year 1 is $60,000 × 40% = $24,000, and year 2 is ($60,000 − $24,000) × 40% = $14,400. Salvage value isn't in the formula, but you stop when book value reaches $6,000, so year 5 is capped at $1,776.
- Units of production: The machine is expected to pack 300,000 units, so the rate is $54,000 ÷ 300,000 = $0.18 a unit. It packs 72,000 units in year 1 ($12,960) and 66,000 in year 2 ($11,880).
- Sum-of-the-years' digits: The digits are 1 + 2 + 3 + 4 + 5 = 15. Year 1 is $54,000 × 5 ÷ 15 = $18,000, and year 2 is $54,000 × 4 ÷ 15 = $14,400.
All four methods depreciate exactly $54,000 over the asset's life. The journal entry is the same for every method: only the amount changes. For a monthly entry under an accelerated method, divide the year's figure by 12, so double declining balance books $2,000 a month in year 1.
What is the journal entry for accumulated depreciation?
There's no separate entry for accumulated depreciation: it's the credit side of every depreciation entry, and its balance is the running total of all depreciation recorded on an asset. You reduce it only when the asset is sold, scrapped, or otherwise removed.
Accumulated depreciation is a contra asset account. It carries a credit balance and sits next to the asset account it offsets. That keeps the original cost visible while showing how much of it has been used. Its balance can't exceed cost minus salvage value.
Why not credit the machinery account directly? Your register, your auditors, and your tax records all need the original cost, and a separate contra account keeps both numbers: what you paid and how much is used up. Accumulated depreciation is a permanent account, so it doesn't close at year-end and carries into the post-closing trial balance.
Accumulated depreciation on the packaging machine (straight-line)
| Date | Months depreciated | Cost | Accumulated depreciation | Net book value |
|---|---|---|---|---|
| January 31, 2026 | 1 | $60,000 | $900 | $59,100 |
| October 31, 2026 | 10 | $60,000 | $9,000 | $51,000 |
| December 31, 2026 | 12 | $60,000 | $10,800 | $49,200 |
| December 31, 2027 | 24 | $60,000 | $21,600 | $38,400 |
| June 30, 2028 | 30 | $60,000 | $27,000 | $33,000 |
| December 31, 2030 | 60 | $60,000 | $54,000 | $6,000 |
Once the balance reaches $54,000, you stop recording depreciation. The machine stays on the books at its $6,000 salvage value until you dispose of it.
How do you show fixed assets on the balance sheet?
You show fixed assets at cost, less accumulated depreciation, with the net book value as the line that counts toward total assets. You can show one net line on the face of the balance sheet and break it out by asset class in the notes.
Example: The company's property and equipment at October 31, 2026, including the packaging machine:
| Asset class | Cost | Accumulated depreciation | Net book value |
|---|---|---|---|
| Land | $150,000 | $0 | $150,000 |
| Buildings | $600,000 | ($180,000) | $420,000 |
| Machinery and equipment | $385,000 | ($132,500) | $252,500 |
| Computer equipment | $150,000 | ($82,000) | $68,000 |
| Total | $1,285,000 | ($394,500) | $890,500 |
On the balance sheet, this becomes one noncurrent asset line: "Property and equipment, net: $890,500." Land carries no accumulated depreciation because it isn't depreciated. In the trial balance, cost and accumulated depreciation stay in separate accounts, so the debits show $1,285,000 and the credits show $394,500.
Depreciation also shows up on the cash flow statement. Under the indirect method, you add the year's depreciation back to net income in operating activities because it reduced profit without using cash: $10,800 for the packaging machine in 2026. When you sell an asset, you subtract the gain (or add back the loss) in operating activities and show the full proceeds in investing activities.
What is the journal entry for fixed assets?
When you buy a fixed asset, you debit the fixed asset account for its full cost and credit cash, or accounts payable if you'll pay later. The purchase never touches the income statement: expense starts only when depreciation starts.
Example: The packaging machine's $60,000 cost is a $57,500 invoice price, $1,500 of freight, and $1,000 of installation.
Fixed asset purchase entry, January 2, 2026
| Account | Debit | Credit |
|---|---|---|
| Machinery and equipment | $60,000 | |
| Accounts payable | $60,000 |
When you pay the vendor, debit accounts payable $60,000 and credit cash $60,000. If you pay at purchase, credit cash directly and skip accounts payable.
For an asset you build or install over several months, costs collect in a construction in progress account first. When the asset is placed in service, you debit the fixed asset account and credit construction in progress, and depreciation begins that month.
What is asset capitalization?
Asset capitalization means recording a purchase as an asset on the balance sheet instead of as an expense, then depreciating it over its useful life. You capitalize items that last more than a year and cost more than your capitalization threshold.
What goes into the capitalized cost:
- Capitalize: Purchase price, freight, installation, sales tax, and testing needed to get the asset ready for use
- Expense: Routine repairs and maintenance, staff training, and anything below your threshold
Your capitalization threshold is a written policy that sets the minimum cost to capitalize, so your team treats small purchases the same way every time. Many companies line it up with the IRS de minimis safe harbor, a tax election. Your book threshold is an accounting policy based on materiality, so it doesn't have to match. According to the IRS tangible property regulations page (last reviewed August 4, 2026), a business without an applicable financial statement can deduct up to $2,500 per invoice or item. A business with one, such as audited financial statements, can deduct up to $5,000 per invoice or item. The IRS says you make that election each year by attaching a statement to your timely filed tax return.
Example: With a $2,500 threshold, a $1,800 laptop goes straight to expense: debit office equipment expense $1,800 and credit accounts payable $1,800. A $3,200 laptop is capitalized as computer equipment and depreciated.
How do you record depreciation as a month-end adjusting entry?
Depreciation is a month-end adjusting entry: you post it on the last day of each period so that period's income statement carries its share of the asset's cost. It's an estimate recorded without an invoice or a cash payment.
Like other adjusting entries, it goes in before you run the adjusted trial balance. A consistent order keeps the entry complete and accurate:
- Record additions and disposals first: Add every asset placed in service during the month and remove every asset sold or scrapped
- Run depreciation in the fixed asset register: Calculate the month's depreciation for each asset, using its method and in-service date
- Post one summary entry: Debit depreciation expense by department or asset class and credit accumulated depreciation by asset class. Attach the register's depreciation report: it's the support for the entry
- Compare with last month: Explain any change. In the October example below, depreciation rose because a second $60,000 packaging machine went into service.
- Reconcile and sign off: Tie the register to the general ledger before you lock the period
Depreciation doesn't need a reversing entry, because the expense belongs to the month you record it. For where it sits among accruals, prepaids, and deferrals, see month-end journal entries.
How do you record depreciation in QuickBooks Online or NetSuite?
In QuickBooks Online, you record depreciation with a journal entry unless you're on the Advanced plan, which can track it automatically. In NetSuite, the Fixed Assets Management SuiteApp calculates depreciation from each asset record and creates the journal entries for you.
QuickBooks Online, following Intuit's help article "Set up an asset depreciation account in QuickBooks Online" (updated October 28, 2026):
- Set up two accounts: Accumulated Depreciation, with account type Fixed Assets and detail type Accumulated Depreciation, and Depreciation, with account type Other Expense and detail type Depreciation
- Open a journal entry: Select + New or + Create, then Journal entry
- Enter the lines: Credit the accumulated depreciation account $900 and debit the depreciation account $900, then save
Intuit says Simple Start, Essentials, and Plus don't depreciate fixed assets automatically, so on those plans you post the entry yourself each month until the asset is fully depreciated or sold.
NetSuite, following Oracle's help topic "Depreciating Assets for the Period" (checked November 17, 2026):
- Open the depreciation run: Go to Fixed Assets > Transactions > Asset Depreciation
- Choose the scope: Select the asset types and subsidiaries, and enter the depreciation period, the date up to which assets are depreciated
- Run it: Click Depreciate Assets. The SuiteApp calculates depreciation and creates the depreciation journals
Oracle notes that the depreciation date must fall in an existing accounting period or no journal is created, and that when journal approvals are turned on, the depreciation journals need approval before they post. Check both before you reconcile. In either system, the entry that reaches the general ledger is the same debit to depreciation expense and credit to accumulated depreciation.
How do you calculate depreciation for a partial month?
For an asset placed in service mid-month, you follow your written convention: a full month, a half month, or the actual days in service. Pick one convention, write it into your fixed asset policy, and apply it to every asset.
Example: If the packaging machine had been placed in service on January 20, 2026, instead of January 2, January's depreciation would be:
| Convention | Rule | January 2026 depreciation |
|---|---|---|
| Full-month (15th-of-the-month rule) | Full month if placed in service by the 15th, none if after | $0, starting with $900 in February |
| Half-month | Half a month in the first month, whatever the date | $450 |
| Actual days | Monthly amount × days in service ÷ days in the month | $900 × 12 ÷ 31 = $348.39 |
The same rule applies in the month you dispose of an asset. In the sale examples below, the machine is sold on June 30, 2028, so the full-month convention gives June a full $900.
The total over the asset's life doesn't change with the convention. Only the timing does, so the convention you pick matters most for assets placed in service near a quarter-end or year-end.
How do you change an asset's useful life or depreciation method?
A change in useful life or salvage value is a change in accounting estimate: you don't post a catch-up entry. You spread the remaining book value over the new remaining life, starting in the period of the change. US GAAP sets this out in ASC 250-10-45-17, and IFRS in IAS 8.
Example: On January 1, 2028, after 24 months, the packaging machine is in better shape than expected. You now expect 5 more years of use instead of 3, with the same $6,000 salvage value.
- Net book value: $60,000 − $21,600 = $38,400
- Left to depreciate: $38,400 − $6,000 = $32,400
- New monthly depreciation: $32,400 ÷ 60 months = $540, down from $900
From January 2028, the monthly entry debits depreciation expense and credits accumulated depreciation for $540. The months already recorded stay as they are. The sale examples below keep the original 5-year life.
A change in depreciation method, such as from double declining balance to straight-line, is also applied going forward. US GAAP calls it a change in estimate effected by a change in accounting principle (ASC 250-10-45-18), so you need to show the new method is preferable. IAS 16 requires you to review useful life and residual value at least at each financial year-end. US GAAP sets no fixed cycle, but events such as an impairment test should prompt a review of the estimates (ASC 360-10-35-22).
What is the journal entry for sale of an asset?
To record the sale of a fixed asset, you debit cash for the proceeds, debit accumulated depreciation, credit the asset at its original cost, and record the difference as a gain or loss. First, post depreciation through the sale date.
Example: You sell the packaging machine on June 30, 2028, after 30 months of depreciation.
- Accumulated depreciation: 30 months × $900 = $27,000
- Net book value: $60,000 − $27,000 = $33,000
Sale at a gain
You sell the machine for $36,000. Proceeds of $36,000 − net book value of $33,000 = a $3,000 gain.
| Account | Debit | Credit |
|---|---|---|
| Cash | $36,000 | |
| Accumulated depreciation, machinery and equipment | $27,000 | |
| Machinery and equipment | $60,000 | |
| Gain on disposal of fixed assets | $3,000 | |
| Total | $63,000 | $63,000 |
Sale at a loss
You sell the machine for $30,000. Proceeds of $30,000 − net book value of $33,000 = a $3,000 loss.
| Account | Debit | Credit |
|---|---|---|
| Cash | $30,000 | |
| Accumulated depreciation, machinery and equipment | $27,000 | |
| Loss on disposal of fixed assets | $3,000 | |
| Machinery and equipment | $60,000 | |
| Total | $60,000 | $60,000 |
Record gains and losses on disposal on their own line, separate from revenue. If the sale is on credit, debit a receivable instead of cash.
How do you record disposal of an asset that is not fully depreciated?
When you scrap or write off an asset that isn't fully depreciated, you remove its cost and accumulated depreciation and record the remaining net book value as a loss on disposal. With no proceeds, the whole book value is the loss.
Example: On June 30, 2028, the machine fails and you scrap it with no proceeds. Accumulated depreciation is $27,000 and net book value is $33,000.
| Account | Debit | Credit |
|---|---|---|
| Accumulated depreciation, machinery and equipment | $27,000 | |
| Loss on disposal of fixed assets | $33,000 | |
| Machinery and equipment | $60,000 | |
| Total | $60,000 | $60,000 |
If you pay a contractor to haul it away, add the cost to the loss. If you sell it for scrap, debit cash for the proceeds and reduce the loss by the same amount.
What do you do with a fully depreciated asset?
When an asset is fully depreciated but still in use, you stop recording depreciation and leave both its cost and its accumulated depreciation on the books. There's no entry while it stays in service, and you remove it only when you sell, scrap, or retire it.
Example: On December 31, 2030, the packaging machine reaches $54,000 of accumulated depreciation and a $6,000 net book value, its salvage value. It keeps running in 2031, so the register stops the $900 entry, and the balance sheet still shows $60,000 of cost and $54,000 of accumulated depreciation.
Sale of the fully depreciated machine for $8,000 in 2031
| Account | Debit | Credit |
|---|---|---|
| Cash | $8,000 | |
| Accumulated depreciation, machinery and equipment | $54,000 | |
| Machinery and equipment | $60,000 | |
| Gain on disposal of fixed assets | $2,000 | |
| Total | $62,000 | $62,000 |
If you scrap it instead, with no proceeds, you debit accumulated depreciation $54,000, debit loss on disposal $6,000, and credit machinery and equipment $60,000. If the machine had no salvage value, scrapping it would produce no gain or loss at all.
Many fully depreciated assets still in use can mean your useful lives are too short. Lengthen the lives of similar assets you're still depreciating, as a change in estimate, rather than adjusting past depreciation.
How do you account for fixed assets and depreciation?
You account for fixed assets in four steps: capitalize the cost, depreciate it every month, reconcile the register to the general ledger, and remove the asset when it leaves the business. The table below holds every entry for the packaging machine in one place.
| Event | Debit | Credit | Amount in the example |
|---|---|---|---|
| Buy the asset | Machinery and equipment | Accounts payable | $60,000 |
| Pay the vendor | Accounts payable | Cash | $60,000 |
| Record monthly depreciation | Depreciation expense | Accumulated depreciation | $900 a month |
| Sell at a gain | Cash $36,000, accumulated depreciation $27,000 | Machinery and equipment $60,000, gain $3,000 | $63,000 each side |
| Sell at a loss | Cash $30,000, accumulated depreciation $27,000, loss $3,000 | Machinery and equipment $60,000 | $60,000 each side |
| Scrap before fully depreciated | Accumulated depreciation $27,000, loss $33,000 | Machinery and equipment $60,000 | $60,000 each side |
| Sell after fully depreciated | Cash $8,000, accumulated depreciation $54,000 | Machinery and equipment $60,000, gain $2,000 | $62,000 each side |
| Record 2026 deferred tax (100% bonus) | Deferred income tax expense | Deferred tax liability | $10,332 |
Every asset also needs a line in the fixed asset register. That subledger holds each asset's cost, in-service date, method, useful life, salvage value, location, and accumulated depreciation. The register is what you reconcile against the general ledger.
How do you reconcile fixed assets?
A fixed asset reconciliation rolls cost and accumulated depreciation forward for the period and ties the closing balances in the fixed asset register to the general ledger. It confirms every addition, disposal, and depreciation entry made it into both.
Example: In October 2026, the company places a second $60,000 packaging machine and $25,000 of laptops in service. It also sells servers that cost $40,000, with $36,000 of accumulated depreciation, for $5,000, a $1,000 gain. October depreciation in the register is $18,500.
Cost roll-forward, October 2026
| Asset class | October 1 | Additions | Disposals | October 31 |
|---|---|---|---|---|
| Land | $150,000 | $0 | $0 | $150,000 |
| Buildings | $600,000 | $0 | $0 | $600,000 |
| Machinery and equipment | $325,000 | $60,000 | $0 | $385,000 |
| Computer equipment | $165,000 | $25,000 | ($40,000) | $150,000 |
| Total | $1,240,000 | $85,000 | ($40,000) | $1,285,000 |
Accumulated depreciation roll-forward, October 2026
| Asset class | October 1 | Depreciation | Disposals | October 31 |
|---|---|---|---|---|
| Buildings | $178,000 | $2,000 | $0 | $180,000 |
| Machinery and equipment | $124,000 | $8,500 | $0 | $132,500 |
| Computer equipment | $110,000 | $8,000 | ($36,000) | $82,000 |
| Total | $412,000 | $18,500 | ($36,000) | $394,500 |
Net book value moves from $828,000 to $890,500: $828,000 + $85,000 of additions − $18,500 of depreciation − $4,000 of book value sold = $890,500. The server sale entry debits cash $5,000 and accumulated depreciation $36,000. It credits computer equipment $40,000 and gain on disposal $1,000, so each side totals $41,000.
Register to general ledger tie-out, October 31, 2026
| Account | Fixed asset register | General ledger | Difference |
|---|---|---|---|
| Fixed asset cost | $1,285,000 | $1,285,000 | $0 |
| Accumulated depreciation | $394,500 | $395,400 | ($900) |
| Depreciation expense, October | $18,500 | $19,400 | ($900) |
| Gain on disposal, October | $1,000 | $1,000 | $0 |
The $900 difference equals one month of depreciation on a packaging machine. That points to a manual depreciation entry posted on top of the register's run. Reversing it brings both accounts back to the register.
The steps for a monthly fixed asset reconciliation:
- Close the register for the month: Enter every addition and disposal, then run depreciation
- Roll forward cost: Opening balance + additions − disposals = closing balance, by asset class
- Roll forward accumulated depreciation: Opening balance + depreciation − disposals = closing balance, by asset class
- Tie out to the general ledger: Match cost, accumulated depreciation, depreciation expense, and gain or loss on disposal to the register
- Investigate differences: Look for manual entries to fixed asset accounts, disposals removed in only one place, transfers between asset classes booked on one side only, and additions coded to expense
- Scan expense accounts for missed additions: Review repairs, maintenance, and equipment expense for invoices above your capitalization threshold
- Check construction in progress: Move anything placed in service to its asset class so depreciation starts on time
- Attach support and sign off: Keep the roll-forward, invoices for additions, and disposal documents with the reconciliation
Fixed assets follow the same preparer and reviewer workflow as every other balance sheet account reconciliation. To see where the review falls in the close, with an owner and due day for each task, use the month-end close checklist.
How do you correct a depreciation error?
How you fix a depreciation error depends on when you find it and whether it's material. In an open period, you correct the entry. For a closed period whose financial statements are already issued, an immaterial error is usually corrected in the current period, while a material error means restating the prior periods, with the cumulative effect in opening retained earnings (ASC 250-10-45-23 under US GAAP, IAS 8 under IFRS). Materiality is a judgment about size and nature, so treat an amount near your threshold as a reason for review, not a bright line.
Example: In January 2027, the reconciliation turns up a $72,000 CNC machine placed in service on October 1, 2026. It's in the general ledger but was never set up in the fixed asset register. With a 5-year life and no salvage value, it should have had $72,000 ÷ 60 = $1,200 of depreciation a month, so $3,600 is missing for October to December 2026, and the 2026 books are closed.
If the error is immaterial: correct it in January 2027
| Account | Debit | Credit |
|---|---|---|
| Depreciation expense | $3,600 | |
| Accumulated depreciation, machinery and equipment | $3,600 | |
| Memo: Out-of-period correction, October to December 2026 depreciation on CNC machine not set up in the register |
If the error is material: restate 2026
| Account | Debit | Credit |
|---|---|---|
| Retained earnings, opening balance | $2,844 | |
| Deferred tax liability | $756 | |
| Accumulated depreciation, machinery and equipment | $3,600 | |
| Total | $3,600 | $3,600 |
The restatement entry assumes a C corporation at the 21% federal rate whose tax depreciation was already right. The lower book value shrinks the gap between book and tax basis, which cuts the deferred tax liability by $3,600 × 21% = $756. Either way, add the machine to the register with its October 1, 2026 in-service date so the January run picks up $1,200 a month from then on. If your tax depreciation is also wrong, ask your tax advisor how to correct the returns.
What is the difference between book and tax depreciation?
Book depreciation follows your accounting policy and spreads cost over useful life, while tax depreciation follows IRS rules that deduct the cost faster for most property. You keep both in the fixed asset register and track the gap.
For federal tax, IRS Publication 946 (2025) says you must use the Modified Accelerated Cost Recovery System (MACRS) for most property. The IRS Instructions for Form 4562 (2025) say 3-, 5-, 7-, and 10-year property generally uses the 200% declining balance method with a half-year convention, or a mid-quarter convention when more than 40% of the year's property is placed in service in the last three months. They list office furniture and equipment as 7-year property and nonresidential real property at 39 years.
Two provisions can move the deduction even earlier:
- Special depreciation allowance: Publication 946 (2025) says the One Big Beautiful Bill Act reinstated the 100% allowance for qualified property acquired and placed in service after January 19, 2025
- Section 179: Publication 946 (2025) sets the maximum deduction for tax years beginning in 2026 at $2,560,000, reduced once qualifying property placed in service exceeds $4,090,000. The deduction is also limited to your taxable business income for the year
Example: If the packaging machine qualifies for the 100% allowance, your 2026 tax deduction could be the full $60,000, against $10,800 of book depreciation. At December 31, 2026, the machine's book value is $49,200 and its tax basis is $0. For a C corporation at the 21% federal rate, that $49,200 temporary difference is a deferred tax liability of $49,200 × 21% = $10,332 under ASC 740, Income Taxes.
Deferred tax entry, December 31, 2026
| Account | Debit | Credit |
|---|---|---|
| Deferred income tax expense | $10,332 | |
| Deferred tax liability | $10,332 |
The tax depreciation itself never posts to your general ledger. It lives in the tax columns of the register, and only the deferred tax entry reaches your books. In each later year, $10,800 of book depreciation with no tax depreciation left reverses $10,800 × 21% = $2,268 of the liability.
The gap also changes the sale. If you sell the machine for $36,000 in June 2028, the book gain is $3,000, but the tax gain is the full $36,000 because the tax basis is $0. IRS Publication 544 (2025) treats that gain on equipment as ordinary income up to the depreciation taken, including bonus depreciation and Section 179, which is called depreciation recapture. Confirm asset classes, elections, and state rules with your tax advisor, because they depend on the asset and the year.
How does depreciation differ under US GAAP and IFRS?
The journal entry is the same under both: debit depreciation expense and credit accumulated depreciation. The differences are in how you split an asset into parts, how often you review estimates, and how you measure the asset after you buy it.
| Topic | US GAAP (ASC 360) | IFRS (IAS 16) |
|---|---|---|
| Components | Allowed but not required, so most companies depreciate a machine as one unit | Required: each significant part with a different useful life is depreciated separately |
| Useful life and residual value | Revised when facts change, as a change in estimate under ASC 250 | Reviewed at least at each financial year-end |
| Measurement after purchase | Cost less accumulated depreciation only. Revaluation isn't permitted | Cost model, or a revaluation model applied to a whole asset class |
| Revaluation increases | Not applicable | Go to other comprehensive income and a revaluation surplus in equity |
| Depreciation method | Any systematic and rational method | Must reflect how the benefits are used up. Revenue-based methods aren't allowed |
Example: Suppose $12,000 of the packaging machine's $60,000 cost is a motor you expect to replace after 3 years. Under IFRS, you depreciate the motor on its own: $12,000 ÷ 36 months = $333.33 a month. The rest of the machine, $48,000 less the $6,000 salvage value, runs over 60 months at $700 a month. That's $1,033.33 a month for the first three years, against $900 if you treat the machine as one unit, as US GAAP allows.
How we approach it
Our Close Agent handles fixed assets as one area of your close: additions, depreciation, and disposals. It prepares each entry with its workpaper, ties every balance to the cent, and sends it to a named approver. Nothing posts to your ERP until that person signs off. It reads from and posts approved entries to NetSuite, Oracle, SAP S/4HANA, Microsoft Dynamics 365, Business Central, and QuickBooks. If you want that work prepared before your team starts the close, explore the Close Agent or book a working session.
Share this article